Description:
Complex anti-wear additive for all types of diesel fuel, especially for Types I and II with low sulfur content according to GOST R 52368-2005 (European specification EN 590-2005). For maximum effect, use regularly. The effect becomes noticeable after about 20 hours of driving (approximately 1200–1600 km).
Product Properties:
Forms a stable and strong ester–oil lubricating film with high adsorption on the components and parts of the fuel system, significantly reducing friction and wear.
Especially effective in high-pressure fuel pumps (plunger–sleeve pairs), injectors, and pump injectors — extends the service life of these costly parts.
Creates an additional lubricating layer in the combustion chamber, reducing friction and wear of pistons, rings, and valve seats, even those not hardened. Completely burns without leaving carbon deposits.
Contains cleaning additives that effectively remove dirt, deposits, and carbon residues from the fuel system and combustion chamber, and prevent new ones from forming.
Provides strong anti-corrosion protection.
Improves fuel combustion efficiency; increases cetane number by 1–2 points.
Restores elasticity and volume of rubber seals.
Prevents oxidation and resin formation in low-grade fuels.
Reduces fuel consumption and exhaust gas toxicity.
Prevents diesel fuel stratification and restores properties of stored fuel.
The combination of effects achieved has no analogues.
Application:
Add to the fuel tank at a ratio of 50 ml per 50 liters of fuel.
Recommended for regular use.
Precautions:
Do not exceed the recommended dosage.
Avoid exposure to ultraviolet rays.